一本色道久久综合精品竹菊_日韩欧美亚洲综合_日韩中文字幕一区二区_精品入口麻豆88视频

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

tailboard balance cylinder Sold to Peru

Release time:2023-11-18 17:15:45 Hits: Current position: Home > News

This article mainly introduces:

Peru hydraulic cylinder,tailboard balance cylinder manufacturer,tailboard balance cylinder

Peru tailboard balance cylinder

(Peru tailboard balance cylinder,produced by Hengyu Hydraulic Co., Ltd)

tailboard balance cylinder are widely used in Peru,because of high work efficiency,excellent fatigue and impact resistance,no need for deceleration device.So our company has designed tailboard balance cylinder for customers from Peru.

Introduction to tailboard balance cylinder:

When installing the tailboard balance cylinder pipe, the pipe should be cleaned after installation, and should not pass through the tailboard balance cylinder block, and the by-pass pipe must be installed in front of the oil port of the tailboard balance cylinder block. This is important. Otherwise, the foreign body in the pipeline will enter the tailboard balance cylinder, and once it enters, it is difficult to exclude it, but it becomes a foreign body transported to the tailboard balance cylinder. Moreover, when cleaning, the removal method of foreign bodies entered in the installation pipeline operation should be considered. In addition, the corrosion in the pipe should be pickling and other procedures before the pipe installation, and the rust must be completely removed.

Piston tailboard balance cylinder is widely used in hydraulic transmission. When the tailboard balance cylinder works, it mainly delivers hydraulic oil alternately to both sides of the piston in the tailboard balance cylinder, and uses the pressure difference of hydraulic oil on both sides of the piston to realize the reciprocating movement of the piston. If you want to speed up the forward speed of the piston, the return oil in the tailboard balance cylinder can be controlled by the valve and directly input into the inlet pipe to participate in the work of the piston to achieve rapid movement of the piston, but the thrust of the piston is reduced much.

The definition of the minimum starting pressure of the tailboard balance cylinder refers to the minimum working pressure of the tailboard balance cylinder in the no-load state, which is a comprehensive index reflecting the manufacturing and assembly accuracy of the tailboard balance cylinder parts and the size of the sealing friction.

The piston rod and guide sleeve function of the tailboard balance cylinder is crucial: the relative motion pair between the piston rod and the guide sleeve is the main factor causing external leakage, if the chrome layer on the surface of the piston rod is spalling or producing longitudinal tensile marks due to wear, it will directly lead to the failure of the seal.

Answers to some questions about tailboard balance cylinder:

How to calculate hydraulic cylinder thrust?
Cylinder diameter = piston diameter =200MM Piston area =π (200/2) square =3140 square mm =31.4 square cm 25MPA=250KG/ square cm Maximum thrust = pressure * Piston area =250 *31.4 =7850KG=78500 Newtons This is the maximum thrust. The formula can be derived from the calculation formula.

Why hydraulic cylinder load can not rise?
The hydraulic cylinder does not top up indicates that the pressure of the working chamber of the hydraulic cylinder is insufficient, and the following circumstances can lead to insufficient pressure: 1) The relief valve of the hydraulic system cannot establish pressure, elimination method: check whether the pressure setting screw of the relief valve is screwed to the appropriate position. If it is an electromagnetic relief valve, please check the power-on condition. 2) The hydraulic system pipeline is connected incorrectly, when P and T are connected, this must be checked and excluded; 3) Excessive leakage in the hydraulic cylinder, resulting in (only for double-acting cylinders); 3) No hydraulic oil into the working chamber of the hydraulic cylinder, elimination method: first disassemble the hydraulic pipe connecting the reversing valve and the hydraulic cylinder, and then control the reversing valve, and observe whether there is hydraulic oil flowing out of the reversing valve.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
主站蜘蛛池模板: 阳高县| 长武县| 甘泉县| 灵山县| 杂多县| 青海省| 盐城市| 齐齐哈尔市| 丽水市| 日土县| 濮阳市| 凉山| 确山县| 简阳市| 高安市| 美姑县| 乌拉特前旗| 泽库县| 玉溪市| 海晏县| 大埔区| 东乌珠穆沁旗| 鹤山市| 噶尔县| 长沙县| 丽江市| 安龙县| 红桥区| 襄垣县| 日喀则市| 远安县| 郓城县| 龙井市| 孟津县| 石泉县| 万盛区| 丹东市| 正宁县| 天峨县| 信阳市| 凤庆县|