一本色道久久综合精品竹菊_日韩欧美亚洲综合_日韩中文字幕一区二区_精品入口麻豆88视频

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

steering power cylinder Sold to Cote d 'Ivoire

Release time:2023-11-12 15:30:23 Hits: Current position: Home > News

This article mainly introduces:

Cote d 'Ivoire hydraulic cylinder,steering power cylinder manufacturer,steering power cylinder

Cote d 'Ivoire steering power cylinder

(Cote d 'Ivoire steering power cylinder,produced by Hengyu Group)

steering power cylinder are widely used in Cote d 'Ivoire,because of smooth movement,no need for deceleration device,long service life.So our company has designed steering power cylinder for customers from Cote d 'Ivoire.

Introduction to steering power cylinder:

The meaning of the steering power cylinder model marked by the steering power cylinder manufacturer: for example, 160/100-1150, its meaning: from a professional point of view, 160 refers to the steering power cylinder diameter, which is 160mm, and the 100 behind refers to the rod diameter, which is 100mm. The 1150 refers to the steering power cylinder stroke, which is 1150mm. Therefore, on this point, we should have a correct understanding and can not make mistakes.

The internal leakage of the steering power cylinder should be prevented when the steering power cylinder is used. The internal leakage of steering power cylinder includes the leakage caused by excessive wear of steering power cylinder block seal, piston rod and seal cover seal and piston seal. The cause of sealing leakage between the piston rod and the seal cover is that the seal is wrinkled, squeezed, torn, worn, aging, deterioration, deformation, etc., and a new seal should be replaced at this time.

At the rated pressure, the thrust of the steering power cylinder is determined by what factors: at the rated pressure of the oil pump, the work done by the steering power cylinder is related to the diameter of the steering power cylinder, but not to the stroke of the steering power cylinder. Moreover, the larger the steering power cylinder diameter, the larger the area, and the greater the pressure obtained. To this point, we should have a correct understanding and clear understanding, so as to avoid problems in the use of the steering power cylinder.

In order to ensure the service life of the steering power cylinder, the hydraulic system must be set up effective filtration to prevent pollution, the cleanliness of the oil should meet the ISO4406 standard, and the quality of the filtration should also meet the corresponding standards in ISO. The grade requirements of the filter are performed according to the actual working conditions of the system, but the minimum requirements are not less than 19/15 in ISO4406, that is, 24μ (β10≥75) in ISO4572.

Answers to some questions about steering power cylinder:

How to calculate the tonnage of the hydraulic press? Example: The input cylinder pressure is 5Mpa, the end area of the cylinder piston is 100mm, and how much is the thrust tonnage?
F=P*S=5*10^6*3.14*(1/20)^2=39250N.

How does the cylinder of the shearing machine work?
Plate shear is a machine that cuts a sheet with a reciprocating straight motion from one blade to another. Through the moving upper blade and the fixed lower blade, the shear force is applied to the metal sheet of various thicknesses with a reasonable blade gap, so that the sheet is broken and separated according to the required size. Shearing machine belongs to one of the forging machinery, the main role is the metal processing industry. Products are widely used in aviation, light industry, metallurgy, chemical industry, construction, shipbuilding, automobile, electric power, electrical appliances, decoration and other industries to provide the required special machinery and complete sets of equipment. Working principle: The hydraulic system is used to drive the hydraulic cylinder to output a strong shear force to complete the shearing work.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
主站蜘蛛池模板: 噶尔县| 洛宁县| 射阳县| 贵定县| 敦煌市| 台北县| 翁源县| 阜阳市| 克拉玛依市| 平泉县| 兴山县| 唐山市| 凤山县| 雅安市| 延川县| 中方县| 芒康县| 泽州县| 兰溪市| 灵宝市| 平和县| 五指山市| 上蔡县| 邓州市| 肥乡县| 商洛市| 托里县| 乌拉特前旗| 阳城县| 洛南县| 界首市| 台中市| 山东省| 城固县| 金寨县| 酒泉市| 木里| 诏安县| 湖南省| 怀柔区| 芮城县|