一本色道久久综合精品竹菊_日韩欧美亚洲综合_日韩中文字幕一区二区_精品入口麻豆88视频

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

servo hydraulic cylinder Sold to Kuwait

Release time:2023-12-12 10:13:37 Hits: Current position: Home > News

This article mainly introduces:

Kuwait hydraulic cylinder,servo hydraulic cylinder manufacturer,servo hydraulic cylinder

Kuwait servo hydraulic cylinder

(Kuwait servo hydraulic cylinder,produced by Hengyu Group)

servo hydraulic cylinder are widely used in Kuwait,because of excellent temperature resistance,no transmission clearance,powerful torque.So our company has designed servo hydraulic cylinder for customers from Kuwait.

Introduction to servo hydraulic cylinder:

When the servo hydraulic cylinder is in use, once the seal and guide support ring are found to be defective, the seal with the same structural form and appropriate material should be replaced according to the structural form of the servo hydraulic cylinder seal to be repaired, so as to minimize the thickness of the oil film between the seal and the sealing surface and reduce the leakage of the seal.

The servo hydraulic cylinder can not be used as grounding electrode to avoid electric damage to the piston rod.

When the control pressure of the hydraulic system is too low, the servo hydraulic cylinder will appear wrong or no action, because the throttle resistance in the control pipeline may be too large, the flow valve is improperly adjusted, the control pressure is inappropriate, and the pressure source is interfered with. At this time, check the control pressure source to ensure that the pressure is adjusted to the specified value of the system.

If the servo hydraulic cylinder piston rod is found to be worn, it can be brushed and plated first, then ground, and finally adjust the mating accuracy of the piston rod and the guide sleeve. At this time, the guide sleeve can be properly redrilled or the guide sleeve can be re-turned. When making the above repairs, remember to replace various rubber seals in time.

Answers to some questions about servo hydraulic cylinder:

How to select the propulsion cylinder according to the shield attitude, cylinder stroke, shield tail clearance and other factors?
Generally, the shield machine will be equipped with the corresponding cylinder. Soil pressure balancing machine, mud water balancing machine have the corresponding cylinder, there will be no insufficient cylinder force. In the jacking process of the pipe jacking machine, there are certain requirements for the jacking force of the cylinder.

What is the relationship between medium cylinder and side cylinder ratio of forklift truck?
The middle cylinder and the side cylinder seem to have no relationship, as long as the lifting speed required by the design can be ensured, but the diameter of the cylinder can not be too thin, so as to avoid the middle cylinder acting first when the high gantry vibration lifting, and then the two cylinders acting again.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
主站蜘蛛池模板: 泰顺县| 息烽县| 镇雄县| 逊克县| 多伦县| 连城县| 滦平县| 和田市| 华容县| 盱眙县| 梧州市| 开江县| 保德县| 沾化县| 江孜县| 麻城市| 五常市| 安乡县| 贵州省| 那坡县| 绥江县| 洪雅县| 乐业县| 岳西县| 肇东市| 通海县| 宜良县| 商丘市| 常山县| 翁牛特旗| 永德县| 怀远县| 塔城市| 开封市| 杭锦旗| 昌宁县| 喀什市| 通榆县| 雅江县| 油尖旺区| 茌平县|